edc · condensate pumps · alarms · controls and protection devices


The Submersible Condensate Removal Pump

The COUGAR is a submersible condensate removal pump designed to automatically remove condensate water from refrigerated cases, dehumidifiers, fan coils and air conditioning systems. The pump is intended to be installed within a collection tray inside the equipment. The water level is measured by an Electronic Energy Control System (EECS) that controls the operation of the pump via the fully-encapsulated circuitry.


This COUGAR, with its small dimensions, low cost and low power consumption, offers an advantageous alternative to condensate pan heaters. There are additional advantages based on the fact that the pump pumps off the condensate instead of evaporating it off, due to more infrequent defrosting, less temperature cycles and increased energy efficiency.


• Electronic Energy Control System (EECS) with alarm circuit
• Soft start with EECS
• All electrical components safely encapsulated against moisture ingress
• Submersible
• Amazingly quiet
• Powerful and compact
• Filter and non-return valves built in
• No mechanical floats to stick
• CE and UL marked

Technical data

Power supply: 120/240 V, 50/60 Hz Auto sensing
Power consumption: 16 W max., 0.25 when idle
Alarm relay: 5 A, 30 VDC, 250 VAC Break on fault
Capacity: 12 litres/h max. (3.17 US gal/h)
Discharge head: >20 m (65 ft) vertical, >100 m (328 ft) horizontal 1 m max. (3.28 ft) suction
Ambient temp: 0° C - 40° C (32° F to 104° F)
Material: Flame retardant ABS - UL94 5 VA
Discharge tube: 6 mm (1/4“) ID
Dimensions: 160 x 43 x 34 mm (6.3“ x 1.7“ x 1.3“)


> Operating manual

> Installation Video